Skip to main content
/

Site Navigation

Your Account

Choose Language

Help
Editing Step 44 —

Step Type:

Drag to rearrange

For connecting the whips fan lead to the Mini-RAMBo, you must add a connector the orange wire. There are two of these connectors in your kit in case you have problems on the first on.

Strip the insulation off the end of the orange wire approximately 5mm.

Insert the wire into the connector as shown. The wire should be inserted such that the insulation will be captured by the crimp as indicated with a blue arrow and the stranded wire will be capture as indicated with a green arrow.

Use a pair of needle nose pliers to fold the crimp tabs over on the wire / insulation one tab at a time.

The completed crimp should look like the third image.

Your contributions are licensed under the open source Creative Commons license.