Skip to main content
/

Site Navigation

Your Account

Choose Language

Help
Editing Step 36 —

Step Type:

Drag to rearrange

Set the EZR Struder on the work surface with the printer. Route the stepper motor wire down through the hole in the center of the base assembly base plate and plug it into the Mini-RAMBo. Plug into the connecter closest to the fuses. Make sure the red wire on the connecter is positioned​ closest to the fuse.

Pull the slack back out of the wire, bundle it and zip-tie if to the base assembly base plate (as shown).

Your contributions are licensed under the open source Creative Commons license.