Skip to main content
/

Site Navigation

Your Account

Choose Language

Help

Step Type:

Drag to rearrange

Flip the printer over so that it is right side up.

Insert (3) TSLOT nuts into the TSLOT in the top of the printer. Try to align them as shown in the image (to prevent having to move them around too much after the top plate is installed.

In this step and all other steps using the TSLOT nuts, the boss (ridge) on the nut should be facing away from the head of the button head screw.

All of the horizontal plates are laser engraved with XYZ tower indicators. You are going to be installing all of these main horizontal plates in the orientation that puts the XYZ text face up.

Install the top assembly top plate. Don't be too rough or those TSLOT nuts will move.

Fasten the top assembly top plate with (3) 1/4-20 button head screws.

If you are having troubles getting the button head screws to engage the TSLOT nuts, first ensure that you have the nut aligned with the hole, second loosen the 1/4-20 button head screws slightly on the side plates.

Your contributions are licensed under the open source Creative Commons license.