Skip to main content

Site Navigation

Your Account

Choose Language

Editing Step 27 —

Step Type:

Drag to rearrange

Group the wires as shown.

Install the Mini-RAMBo in the board supports. The board supports may need to be rotated so that they are at 45 degree angles to the board. They will catch on the 4 corners of the board.

Insert the stepper motor plugs into the Mini-RAMBo. Be sure to put the correct stepper motor in the correct port. and the red wires is on the side of the port closest to the fuses.

From the end of the Mini-RAMBo with the USB port the stepper motor ports are: XYZE

Your contributions are licensed under the open source Creative Commons license.