Skip to main content
/

Site Navigation

Your Account

Choose Language

Help
Editing Step 7 —

Step Type:

Drag to rearrange

Locate the (6)2-56 x 5/8" & (6)2-56 nuts from the hardware pack and micro switches from the electronics hardware pack.

Remove the metal levers from the micro switches. This can be done by hand by gently twisting the lever out of place.

Attach the micro switches to the top tower mount pieces as shown. The micro switches will attach to the inside (side WITHOUT text) of the plates engraved "SeeMeCNC"

Note the orientation of the switches. The button should be closest to the TSLOT hardware (green arrows).

Fully tighten the screws/nuts.

Your contributions are licensed under the open source Creative Commons license.