Skip to main content
/

Site Navigation

Your Account

Choose Language

Help

Step Type:

Drag to rearrange

Locate the (50) 1/4-20 button-head machine screws and (50) TSLOT nuts.

Prepare each of the (12) plates with (3) of the button head screws and TSLOT nuts.

In this step and all other steps using the TSLOT nuts, the boss (ridge) on the nut should be facing away from the head of the button head screw.

The head of the button head screws should be on the side of the plates with laser engraving .

Get the button head screws engaged by 1 or 2 thread only, do not tighten.

Your contributions are licensed under the open source Creative Commons license.