OctoPi is a lot of fun, however SeeMeCNC no longer provides technical support or troubleshooting. Proceed on your own and reach out to our forum for reference.
Click Here> You can download OctiPi from this location. If you don't have a SSH client, you can download one from this link.
The SSH client is required in order to do the initial setup of the operating system on your Raspberry Pi.
It's recommended that you follow the instructions titled "Getting Started with OctoPi"
The video linked on the "Getting Started" page does a good job of covering what you need to do in order to configure OctoPi.
Note that I've had some difficulty with the wifi if I encapsulate the SSID with double-quotes, eg. "my_ssid". If your SSID has spaces in it, and the Pi isn't appearing on your network, try using the single "'" quote instead of double quotes.
After running "raspi-config" to expand the file system, you'll want to run it again in order to set up your system for your current country and time zone.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.