Skip to main content

Site Navigation

Your Account

Choose Language


Step Type:

Drag to rearrange

Plug in the power cord for the SeeMeCNC 3D Printer and turn the power on.

When powered up on a newly built printer, the display is going to appear as you see in the photograph. If you don't see a lit LCD with two lines of blocks, check your wiring to make sure everything is connected and correct!

Next, connect the Rambo controller to your computer using the supplied USB cable. If you've got a Mac or Linux computer, there's no driver to install and you can move to the next step.

If you're using Windows, the driver supplied by the Arduino IDE may be the correct one for the Rambo. To check, open up your Device Manager and see if the Rambo appears as a standard USB Serial Device.

Your contributions are licensed under the open source Creative Commons license.