Skip to main content

Site Navigation

Your Account

Choose Language


Step Type:

Attach the previously assembled Mirror Mount (Left) and (Right) Sides to the Cross Brace and Center Brace as shown in the animation.

NOTE: You should have tapped the 2 holes in the Cross Brace as part of the Preparing For the Build Steps. If you have not done that yet, please do so now before proceeding.

NOTE:These pieces are a tight fit. You will need to "walk" the left and right sides onto the cross brace. FURTHER: You will need to install both of the Cross Brace and Center Brace at the same time, otherwise you will only be able to install 1 of the 2 parts.

Do NOT tighten these screws.

Your contributions are licensed under the open source Creative Commons license.