You can see in Pic 1 there are windows in the plug for the thermistor. You can see the metal plugs in the center 2 positions where the thermistor wires go.
You will want to insert something into the window to press on the metal tab that holds the wire into the plug and slide the wire out of the plug. In Pic 2 I am using a pair of tweezers to press on the locking tab.
Pic 3 shows one of the thermistor wires removed.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.