Skip to main content

Site Navigation

Your Account

Choose Language

Editing Step 10 —

Step Type:

Drag to rearrange

You can load filament by heating the hot end up to 220 degrees and manually feeding the filament in through the EZR and boden tube, or by using the "Filament Load" macro

To use the load filament macro, hold in the red button on the EZR extruder and press the filament in until it is just peeking out the side with the boden tube. Then click "Filament Load" under User-Defined Macros, and click OK.

Picture is for reference only - the EZR will be orientated differently on the V3.2

Your contributions are licensed under the open source Creative Commons license.