Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 185 —

Step Type:

Drag to rearrange

Insert the springs into the arms. There is a large hole near the ends of each arms for the springs.

The springs will go in the large hole, and slide towards the end of the arms where it will sit in place so it cannot fall out. See pic 1.

Insert the spring in the other end of the arms as well and let hang as shown in Pic 2.

Install arms and springs on all 3 towers.

The gold blinky eye logo on the hotend will face the front of the machine. Orient the hotend as shown in Pic 3 with the gold logo to the front where the machine logo is on the base.

Your contributions are licensed under the open source Creative Commons license.