Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 183 —

Step Type:

Drag to rearrange

You will now install the glass plate for the bed from the heater/bed/glass kit.

Holding the glass by the edges, place the glass into the recess for the heated bed.

Fingerprints will deposit oils on the glass preventing prints from sticking to the glass. Try to keep it as clean as possible by holding the glass from the edges as shown in Pic 1.

Rotate the 3 bed clamps to secure the glass down to the bed heat spreader.

Your contributions are licensed under the open source Creative Commons license.