Editing Step 179 —

Step Type:

Drag to rearrange

Take 3 of the acrylic corner covers and remove the protective tape.

On the upper frame, the acrylic cover will rest inside the sides sitting against the panel stop installed earlier.

Note there is a notch on the corner acrylic. This notch will be on the top of the acrylic for the upper frame.

Insert one side at a time and bend the corner acrylic around to the other side and insert it behind the side and against the panel stop.

Repeat this install on the other 2 corners of the machine so all 3 corners have acrylic installed as shown in pic 3.

Your contributions are licensed under the open source Creative Commons license.