Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 171 —

Step Type:

Drag to rearrange

Note the shorter bolt will go on the front of the machine in the position of the arrow. The front of the machine is the side with the large hole in the upper frame as shown in Pic 1.

The shorter 5/16" long button head screw will go in the top left hole of this side as shown in Pic 2.

Secure the bolt with a nylon lock nut to secure the top plate to this part of the upper frame as shown in Pic 3. Tighten this bolt fully.

Your contributions are licensed under the open source Creative Commons license.