Editing Step 166 —

Step Type:

Drag to rearrange

This step will use 6x panel stops and 6x nylon push rivets.

Around the top frame using the center holes on each side, you line up the panel stops with the holes on each side in the center and insert the nylon push rivet through the upper frame into the panel stop and push the head of the rivet to lock the panel stop in place.

Pic 2 shows the panel stop in place on one side. You will do this to all 6 locations.

The locations for the panel stops are pointed out in Pic 3 with the red arrows.

Your contributions are licensed under the open source Creative Commons license.