Editing Step 164 —

Step Type:

Drag to rearrange

We will now be assembling the top plate. You will need to gather the top sheet metal plate, 4 silver build plate clamps, 4 large 1" od plastic washers, 4x 6-32 x 1/2" long flat head phillips screws, and 4 nylon lock nuts.

Note the orientation of the top plate in Pic 1. This is the top of the plate. The orientation is important.

Insert the screws through the build plate clamps and into the sheet metal.

On the underside put the washer through the screw and insert the nylon lock nut to secure it in place.

Do not fully tighten the bulid plate clamps so you can still twist them. Tighten the nylon lock nuts snug but not fully tight.

Your contributions are licensed under the open source Creative Commons license.