Editing Step 163 —

Step Type:

Drag to rearrange

Plug the extruder into the Duet. It is placed in the 4th position along the edge where the other motors are plugged in.

Make sure the flat of the motor plug is facing towards the OUTSIDE of the duet as before with the other motors and shown in Pic 1.

As of June 2019, do not follow the pictures, but flip the plug so the wire order is opposite and the smooth side of the plug is facing away from the board, rather than towards the board as shown in the pics!

If you bought the dual extruder kit, the second extruder will plug into the last motor position.

Your contributions are licensed under the open source Creative Commons license.