Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 162 —

Step Type:

Drag to rearrange

On the machine feed the wires into the large opening on the upper frame and align the extruder plate to the opening and holes.

Make sure the extruder is orientated in the proper way. The PTC connector on the extruder should face the bottom of the machine and the red lever will be on the right when facing the extruder.

Insert 4 nylon push rivets into the 4 corners of the plate to secure the plate to the upper frame as shown in the pics.

Your contributions are licensed under the open source Creative Commons license.