Editing Step 156 —

Step Type:

Drag to rearrange

Here we will be installing the extruder to the mounting plate. You will use the final remaining motor, the ezr struder body, the silver ezr knob, hobbed drive roller, allen key, 4x M3x10mm long screws, 2x 6-32 x 7/8" long phillips screws and 2x 6-32 nylon insert lock nuts.

First you will want to cut and remove the zip tie holding together the ezr struder as shown in Pic 2. Discard the zip tie.

Your contributions are licensed under the open source Creative Commons license.