Editing Step 155 —

Step Type:

Drag to rearrange

The wires will go to the duet on the side with the motor plugs and go into the two positions closest to the white connector as shown in pic 1.

You will want to loosen the screws in the terminal before inserting the wires as they typically come closed and will need to be opened.

With the terminals open, insert the black wire into the position closest to the white connector and tighten to secure it.

The red wire will go into the next position next to the black wire as shown in Pic 3.

The green terminals will want to twist on the board when tightening the terminal. Hold the terminal in place with your fingers to prevent the connector from twisting while tightening.

Your contributions are licensed under the open source Creative Commons license.