Editing Step 151 —

Step Type:

Drag to rearrange

Here you will plug in the hotend thermistor to the Duet. It is the white 2 pin connector you just installed on the whip with the two white wires in it.

The thermistor plugs into the location on the duet that is the 2 pin plug in line with the endstop wires. It goes to the 6th position from the inside of the machine lined up with the endstop wires.

This position is shown in Pics 2 and 3. Make sure the plug goes into the proper location.

Your contributions are licensed under the open source Creative Commons license.