Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 141 —

Step Type:

Drag to rearrange

With the belt out the middle of the carraiage, bend the belt up and behind the white ball joints as shown in Pic 1 to hold it in place temporarily.

Repeat the process with the belt coming from the bottom of the machine coming up the extrusion, behind the carriage and use a tool to bring the belt out of the carriage as shown in Pic 2.

As before make sure the belt is not twisted in any part, it should be flat throughout the travel.

Your contributions are licensed under the open source Creative Commons license.