Editing Step 136 —

Step Type:

Drag to rearrange

In this section we will be installing belts on the machine.

Take one of the belts from the final assembly pack. We will start with the X tower. This is the front left tower when looking at the front of the machine.

Insert the belt with the teeth facing the tower as shown in Pic 1 from the inside of the tower.

Push the belt into the base of the machine and from the inside of the machine, feed the belt under the idler bearing as shown in Pic 2.

Pull the belt to give you belt to work with outside of the machine as shown in Pic 3.

Your contributions are licensed under the open source Creative Commons license.