Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 134 —

Step Type:

Drag to rearrange

Next take the black wire from the tower that only contains the single black wire.

Make sure the end of the wire is stripped and insert it into the large green terminal in the position next to the blue fuse as shown in Pic 2.

Tighten the connector to secure the wire in place.

When tightening the connector, the green connector will want to twist on the Duet. Hold the green connector with your hand to prevent it from twisting while tightening the connector.

Your contributions are licensed under the open source Creative Commons license.