Skip to main content
Editing Step 127 —

Step Type:

Drag to rearrange

Here we will plug in the X motor. This is the motor on the bracket on the opposite side of the Duet board.

Plug the motor into the third position from the corner of the board as shown in Pic 2.

***UPDATE**** As of June 2019, the motors must be plugged in with the smooth side of the plug facing the outside of the board, contrary to the pictures, the plugs will be flipped but remain in the same locations.

The X motor should be plugged in as shown in Pic 3.

Your contributions are licensed under the open source Creative Commons license.