Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 118 —

Step Type:

Drag to rearrange

Flip the sheet metal frame upside down so the bottom is facing up so you can work on it.

Put the small shim on the endstop side of the motor bracket as shown in Pic 2. There is a notch in the shim to allow the endstop switch to be not blocked. Pay attention to this orientation.

Using the 6-32 x 7/8" long screws, secure the motor brackets to the top frame as shown in Pic 3.

Your contributions are licensed under the open source Creative Commons license.