Skip to main content
Editing Step 113 —

Step Type:

Drag to rearrange

The board support should be installed as shown in Pic 1 with the screw coming from the underside, through the sheet metal and into the board support.

Install all 4 board supports.

Orient the top of the board supports as shown in Pic 2. Use a pair of pliers to rotate the supports so they are angled to hold the corners of the Duet board as shown in Pic 2.

Insert the Duet into the outermost 2 board supports as shown in Pic 3.

Your contributions are licensed under the open source Creative Commons license.