Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 107 —

Step Type:

Drag to rearrange

From the underside of the heated bed, hold one M3 nylon lock nut and tighten it with a screwdriver to tighten the build plate clamp in place.

Do not over tighten this screw as you will still want to be able to rotate the build plate clamp. Just snug is good

Install a second nylon lock nut on the same screw to prevent any twisting or vibration from loosening the build plate clamps as shown in Pic 3.

Your contributions are licensed under the open source Creative Commons license.