Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 105 —

Step Type:

Drag to rearrange

This step will use 6x 6-32 x 3/4" long phillips head screws.

In front of each tower will be 2 holes that will secure the sheet metal cover to the tower brackets.

Attach all 6 screws using a standard P2 Phillips screwdriver.

Pic 3 shows the location of all 6 screws. Tighten these screws to secure the sheet metal to the brackets.

Your contributions are licensed under the open source Creative Commons license.