Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 100 —

Step Type:

Drag to rearrange

This step will use the 6x 1/4-20 x 1/2" long button cap screws, 6x thin nylon lock nuts, and one spike grounding washer.

Turn the machine on the side so you have access to the power supply bracket panel and the bottom of the machine.

Insert one 1/4-20 x 1/2" long button cap screw through the hole on the bottom under the power plug side of the sheet metal as shown in Pic 3.

Your contributions are licensed under the open source Creative Commons license.