Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 93 —

Step Type:

Drag to rearrange

Note the orientation of the fan . The fan has an arrow facing one side of the fan.

This fan is used as an exhaust and the arrow should face the sheet metal.

Insert the 4 M3 x 35mm long phillips screws from the outside of the sheet metal and through the 4 holes for the fan.

Insert the o-rings over each of the 4 screws from the back side of the sheet metal to hold the screws in place. These o-rings will act as a vibration damper to reduce vibration noise.

Your contributions are licensed under the open source Creative Commons license.