Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 89 —

Step Type:

Drag to rearrange

This step you will need the 3x M4 x 10mm long flat head screws from the lower hardware pack to attach the bed to the PEEK insulators.

Screw the M4 x10mm flat head screws through the bed into the PEEK insulators at each of the 3 mounting tabs on the heated bed as shown in Pic 2.

Pic 3 shows the 3 locations of the tabs you will be screwing the bed to the PEEK insulators.

Your contributions are licensed under the open source Creative Commons license.