Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 88 —

Step Type:

Drag to rearrange

Strip approximately a half inch of the wires in the orange tube coming from the heated bed.

Feed the wires in the orange silicone through the large hole of the bracket of the X tower as shown in Pic 1 and 2.

Attach the red wire from the heated bed to the wago connector with the white wire in the other side of it.

Attach the black wire of the heated bed in the first wago connector that has the black wire in the other position already installed in previous steps.

Your bed should be attached to the connectors as shown in Pic 3.

In the pics shown is a white connector for older builds, your machine should have the thermistor attached to the new thermistor PCB.

Your contributions are licensed under the open source Creative Commons license.