Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 83 —

Step Type:

Drag to rearrange

Insert the thermsitor into the aluminum thermistor bracket as far as it will go.

Use one of the M3 x 10mm long screws to secure the thermistor in place.

Do not over-tighten the screw as you can crush the thermistor. You only want to tighten it slightly more than snug.

In the pics, there is no white plug on the thermistor, yours SHOULD have the plug still on it!

Your contributions are licensed under the open source Creative Commons license.