Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 69 —

Step Type:

Drag to rearrange

This step will use the red wire harness that has 2 red wires into the blue ring terminal with one 400mm long red wire with a red ring terminal, and the 1350mm long red wire with one bare end.

Feed the 400mm long wire over the power supply and through the power supply bracket hole as shown in Pic 2.

Secure the red ring terminal from the 400mm red wire to the solid state relay as shown in Pic 3. The red wire goes to the terminal labeled with a + above it.

Your contributions are licensed under the open source Creative Commons license.