Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 68 —

Step Type:

Drag to rearrange

Repeat the same process as the previous step with the 400mm red wire that has one ring terminal and bare wire on the other end.

Feed the wire through the power supply bracket hole as in the previous step shown in Pic 1.

Secure the ring terminal to the power supply to the first location under the label for +V. You will have 2 empty screw terminals on the power supply between this red wire and the black wire installed in the previous step as shown in Pic 2.

The bare end of the wire will go on the second wago in the position next to the black wire installed in the previous step as shown in Pic 3.

Your contributions are licensed under the open source Creative Commons license.