Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 61 —

Step Type:

Drag to rearrange

Locate the solid state relay from the electronics pack.

Remove the clear top cover and you will use the remaining 2 M3 x 10mm long screws from the lower hardware pack and 2 M3 lock nuts.

Line up the solid state relay next to the power supply as shown in Pic 3. Make sure the orientation of the relay is as shown in the picture with the output of the relay towards the center of the machine, and the input towards the edge of the machine.

Your contributions are licensed under the open source Creative Commons license.