Skip to main content

Site Navigation

Your Account

Choose Language

Help

Step Type:

Drag to rearrange

Place the shim and bracket on the sheet metal lining up the tabs from the bracket with the holes on the sheet metal.

Pic 2 is showing that the tabs will stick out through the sheet metal. This is normal.

Place all 3 brackets and shims on the sheet metal as shown in Pic 3.

Make sure the sheet metal is in the orientation shown in Pic 3 as you do not want to mount the brackets to the wrong side of the sheet metal.

All 3 brackets should have the PEEK insulator facing upwards at this point.

Your contributions are licensed under the open source Creative Commons license.