Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 28 —

Step Type:

Drag to rearrange

Insert the spade connector on the end of the other short stripped green wire.

Crimp the spade connector to the wire making sure you have a sold crimp.

You should have a wire harness as shown in Pic 3. It will have a long green wire with one end free, a blue ring terminal with all 3 green wires attached to it, one short green wire with a spade connector, and one short green wire with a large red ring terminal on it.

Your contributions are licensed under the open source Creative Commons license.