Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 19 —

Step Type:

Drag to rearrange

Pic 1 shows the installed endstop. You will see the button on the endstop is facing the edge of the bracket and must be oriented as shown in Pic 1.

Repeat the endstop installation on all 3 large brackets.

Find the 4 M3x10mm screws and washers.

Place the washers on all 4 screws. Repeat this for the other 2 piles of parts giving you 12 M3x10mm screws and washers.

Your contributions are licensed under the open source Creative Commons license.