Step Type:

Drag to rearrange

For this step you will still be using the parts from the previous step.

You will want to insert the lock nuts into the slots as shown in Pic 1. There is a hex side and a rounded side with a nylon insert on the lock nuts.

You shouldn't generally have to force the nuts in, it should be easy on your fingers.

If you are having trouble, rotate it side to side (like a steering wheel) and it should drop right in with minimal pressure.

The hex side should face the outside of the brackets and the round side with nylon inserts should face the center of the brackets.

Installed lock nuts are shown in Pic 2.

You will insert the lock nuts on all 12 brackets.

Your contributions are licensed under the open source Creative Commons license.