Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 11 —

Step Type:

Drag to rearrange

You will insert a pulley onto the motor as shown in Pic 2. There is a flat section on the motor shaft, and you will line the set screw up with this flat so it is tightened onto the flat.

You will insert the pulley as shown in pic 3 to the depth it is shown. The top arrow shows the flat of the motor almost aligned with the base of the pulley. This is where you want to tighten the set screws.

Your contributions are licensed under the open source Creative Commons license.