Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #37

Edit by Nick Kessler

Edit approved by Nick Kessler

Before
After
Unchanged

Step Lines

[title] Hot End Positive/ Bed Heat Negative
[* black] Install the 18awg red wire coming from the 5A HOT END FUSE into the screw terminal on the Duet Board as shown in the picture.
[* black] Install the 12awg black wire coming from the 15A HEATED BED FUSE into the larger screw terminal on the Duet Board as shown in the picture.
+[* icon_caution] Make sure the green terminal block DOES NOT twist, it could rip off and cause you to replace your entire Duet! You may need to CAREFULLY hold it with pliers while tightening the screw.