Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #33

Edit by Nick Kessler

Edit approved by Nick Kessler

Before
After
Unchanged

Step Lines

+[title] Belt Tension
+[* black] To Tension the belts push the motor forward in the injection molded mount while feeling the belts. Once you have reached the desired tension. Tighten down the 3 screws that were left loose.
+[* black] You do not want the belts too tight or too loose. Most importantly you want them all evenly tensioned. Arrange the 3 carriages so they are at the same height on the rails and do your best to match the tension on each belt.

Image 1

No previous image

Added

Image 2

No previous image

Added