Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #30

Edit by Nick Kessler

Edit approved by Nick Kessler


Step Lines

+[title] Duet Power Connections
+[* black] Now install the black 12awg wire from the Z tower, and the red 12awg wire from the Y tower in the locations indicated here.
+[* icon_note] You can cut these wires to whatever length you would like, just make sure they are not too tight or straining the Duet Connector.
+[* icon_caution] Make sure the green terminal block DOES NOT twist, it could rip off and cause you to replace your entire Duet! You may need to CAREFULLY hold it with pliers while tightening the screw.