Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #1

Edit by Nick Kessler

Edit approved by Nick Kessler

Before
After
Unchanged

Step Lines

[title] NOTICE
-[* black] For this Upgrade you will need to 3D Print a new Standoff for the Duet Wifi board. You can find the STL. file here.
-[* black] You will need to have your SE300 Hot End assembled. For instructions on how to assemble your SE300 click here.
-[* black] You will also need to have your "SE300 Whip" assembled. For instructions on how to assemble your Whip click here.
+[* black] For this Upgrade you will need to 3D Print a new Standoff for the Duet Wifi board. You can find the STL. file [https://github.com/seemecnc/RostockMaxV3.2/blob/master/CAD/Duet%20Adapter%20Mount.STL|here.]
+[* black] You will need to have your SE300 Hot End assembled. For instructions on how to assemble your SE300 click [guide|94|here.]
+[* black] You will also need to have your "SE300 Whip" assembled. For instructions on how to assemble your Whip click [guide|92|here.]