Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by Nick Kessler

Edit approved by Nick Kessler

Before
After
Unchanged

Step Lines

+[title] 40mm Duet Cooling Fan
+[* black] Next step is installing the Duet3D-WiFi cooling fan onto the Laser Cut Panel.
+[* black] Install the 2 Pin Connector on the Red and Black Leads with the Red wire going into the Pin that has a "1" next to it. (see pic for reference)
+[* black] Secure The fan to the Laser Cut Panel by threading 2 Zip-Ties through the laser cut holes, pull tight, and snip off the remaining zip tie ends.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added