Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by Nick Kessler

Edit approved by Nick Kessler


Step Lines

-[title] 40mm Duet Cooling Fan
-[* black] Next step is installing the Duet3D-WiFi cooling fan onto the Laser Cut Panel.
+[title] Preparing 40mm Duet Cooling Fan
+[* black] Next step is preparing the 40mm cooling fan for the Duet3D-WiFi.
[* black] Install the 2 Pin Connector on the Red and Black Leads with the Red wire going into the Pin that has a "1" next to it. (see pic for reference)
-[* black] Secure The fan to the Laser Cut Panel by threading 2 Zip-Ties through the laser cut holes, pull tight, and snip off the remaining zip tie ends.
+[* black] Set Fan aside for next step.

Image 3