Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #14

Edit by Nick Kessler

Edit approved by Nick Kessler

Before
After
Unchanged

Step Lines

+[title] TRIM END STOP WIRES
+[* black] Next step is preparing your end stop wires for the Duet3D-WiFi board. Start by trimming the wires down to length. Pull the wires to the opposite edge of the Laser Cut Plate and snip the off excess.
+[* icon_note] Do Not Worry if your end stop wires are not long enough to be cut to that length. You will soldering on new end stop leads that will be plenty long enough.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added